Differences

This shows you the differences between two versions of the page.

--- mips_cross_compiler [2013/03/29 14:42]
beckmanf created
+++ mips_cross_compiler [2014/06/04 17:52] (current)
beckmanf simple project added
@@ Line 13: / Line 13: @@
   * [[http://www.gnu.org/software/binutils/|GNU Binutils]]
   * [[http://www.gnu.org/software/gcc/|GNU GCC]]
+  * and others...
+From a bare ubuntu 12.04 LTS you need to add the following packages:
+<code>
+sudo apt-get install build-essential m4 texinfo libncurses5-dev bzip2
+</code>
+Copy the script "build_mips.sh" from below to your home directory. Open a terminal window in ubuntu by starting dash and typing terminal.
+The click terminal which opens the terminal. To change the current directory to your home directory type
+<code>
+cd
+</code>
+To see the full path of the current directory:
+<code>
+pwd
+</code>
+List the directory contents with
+<code>
+ls -la
+</code>
+Change the file attributes of "build_mips.sh" to executable with
+<code>
+chmod a+x build_mips.sh
+</code>
+Look into the bash script with
+<code>
+less build_mips.sh
+</code>
+Extend the search path by appending "export PATH=$HOME/site/bin:$PATH" to your .profile file
+Log out and login again to make the PATH variable active. Check your PATH variable with
+<code>
+echo $PATH
+</code>
+You should see the <..>/site/bin as the first entry.
+Run the build script with
+<code>
+./build_mips.sh
+</code>
+Here is the shell script for building the cross compiler chain. Handmade
+stuff so you need to adapt. The script will build to a place in your home
+directory. So first add this place to your PATH variable.
+<code bash build_mips.sh>
+#!/bin/bash -ev
+# -e => exit on error
+# -v => verbose output
+# Mips Cross Compiler
+# Base directory
+mkdir -p mips
+# src directory
+mkdir -p mips/src
+# build directory
+mkdir -p mips/build
+# original archives
+mkdir -p mips/orig
+# Set the destination
+export MYMIPS=${HOME}/site
+# Versions
+GMPVERSION="4.3.2"
+PPLVERSION="0.12.1"
+BINUTILSVERSION="2.24"
+MPFRVERSION="2.4.2"
+MPCVERSION="1.0.2"
+ISLVERSION="0.12.2"
+CLOOGVERSION="0.18.1"
+GCCVERSION="4.8.2"
+NEWLIBVERSION="1.20.0"
+GDBVERSION="7.5.1"
+########################################
+# Binutils
+########################################
+# Get the archives
+cd mips/orig
+if [ ! -e "binutils-${BINUTILSVERSION}.tar.bz2" ] ; then
+  wget http://ftp.gnu.org/gnu/binutils/binutils-${BINUTILSVERSION}.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "binutils-${BINUTILSVERSION}" ] ; then
+tar -xvjf ../orig/binutils-${BINUTILSVERSION}.tar.bz2
+fi
+cd ../build
+mkdir -p binutils
+cd binutils
+if [ ! -e "config.status" ] ; then
+../../src/binutils-${BINUTILSVERSION}/configure --target=mipsel-none-elf \
+--prefix=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/bin/mipsel-none-elf-ld" ] ; then
+make
+make install
+fi
+cd ../../..
+########################################
+# GMP
+########################################
+# Get the archives
+cd mips/orig
+if [ ! -e "gmp-${GMPVERSION}.tar.bz2" ] ; then
+  wget ftp://ftp.halifax.rwth-aachen.de/gnu/gmp/gmp-4.3.2.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "gmp-${GMPVERSION}" ] ; then
+tar -xjvf ../orig/gmp-${GMPVERSION}.tar.bz2
+fi
+# Build
+cd ../build
+mkdir -p gmp
+cd gmp
+if [ ! -e "config.status" ] ; then
+../../src/gmp-${GMPVERSION}/configure --prefix=$MYMIPS --enable-cxx
+fi
+if [ ! -e "${MYMIPS}/lib/libgmp.a" ] ; then
+make
+make install
+fi
+cd ../../..
+########################################
+# PPL
+########################################
+# Get the archives
+#cd mips/orig
+#if [ ! -e "ppl-${PPLVERSION}.tar.bz2" ] ; then
+#  wget ftp://ftp.cs.unipr.it/pub/ppl/releases/${PPLVERSION}/ppl-${PPLVERSION}.tar.bz2
+#fi
+# Unpack to source directory
+#cd ../src
+#if [ ! -d "ppl-${PPLVERSION}" ] ; then
+#tar -xjvf ../orig/ppl-${PPLVERSION}.tar.bz2
+#fi
+#cd ../build
+#mkdir -p ppl
+#cd ppl
+#if [ ! -e "config.status" ] ; then
+#../../src/ppl-${PPLVERSION}/configure --prefix=$MYMIPS --with-gmp=$MYMIPS --with-sysroot=$MYMIPS
+#fi
+#if [ ! -e "${MYMIPS}/lib/libppl.a" ] ; then
+#make
+#make install
+#fi
+#cd ../../..
+######################################
+# MPFR library
+#######################################
+# Get the archives
+cd mips/orig
+if [ ! -e "mpfr-${MPFRVERSION}.tar.bz2" ] ; then
+  wget ftp://ftp.halifax.rwth-aachen.de/gnu/mpfr/mpfr-${MPFRVERSION}.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "mpfr-${MPFRVERSION}" ] ; then
+tar -xvjf ../orig/mpfr-${MPFRVERSION}.tar.bz2
+fi
+cd ../build
+mkdir -p mpfr
+cd mpfr
+if [ ! -e "config.status" ] ; then
+../../src/mpfr-${MPFRVERSION}/configure --prefix=$MYMIPS --with-gmp=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/lib/libmpfr.a" ] ; then
+make
+make install
+fi
+cd ../../..
+######################################
+# MPC library
+#######################################
+# Get the archives
+cd mips/orig
+if [ ! -e "mpc-${MPCVERSION}.tar.gz" ] ; then
+  wget ftp://ftp.halifax.rwth-aachen.de/gnu/mpc/mpc-${MPCVERSION}.tar.gz
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "mpc-${MPCVERSION}" ] ; then
+tar -xvzf ../orig/mpc-${MPCVERSION}.tar.gz
+fi
+cd ../build
+mkdir -p mpc
+cd mpc
+if [ ! -e "config.status" ] ; then
+../../src/mpc-${MPCVERSION}/configure --prefix=$MYMIPS --with-gmp=$MYMIPS --with-mpfr=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/lib/libmpc.a" ] ; then
+make
+make install
+fi
+cd ../../..
+##############
+# ISL
+##############
+# Get the archives
+cd mips/orig
+if [ ! -e "isl-${ISLVERSION}.tar.bz2" ] ; then
+  wget  ftp://gcc.gnu.org/pub/gcc/infrastructure/isl-${ISLVERSION}.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "isl-${ISLVERSION}" ] ; then
+tar -xvjf ../orig/isl-${ISLVERSION}.tar.bz2
+fi
+cd ../build
+mkdir -p isl
+cd isl
+if [ ! -e "config.status" ] ; then
+../../src/isl-${ISLVERSION}/configure --prefix=$MYMIPS --with-gmp-prefix=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/lib/libisl.a" ] ; then
+make
+make install
+fi
+cd ../../..
+##############
+# CLOOG
+##############
+# Get the archives
+cd mips/orig
+if [ ! -e "cloog-${CLOOGVERSION}.tar.gz" ] ; then
+  wget  ftp://gcc.gnu.org/pub/gcc/infrastructure/cloog-${CLOOGVERSION}.tar.gz
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "cloog-${CLOOGVERSION}" ] ; then
+tar -xvzf ../orig/cloog-${CLOOGVERSION}.tar.gz
+fi
+cd ../build
+mkdir -p cloog
+cd cloog
+if [ ! -e "config.status" ] ; then
+../../src/cloog-${CLOOGVERSION}/configure --prefix=$MYMIPS --with-gmp-prefix=$MYMIPS --with-isl=system --with-isl-prefix=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/lib/libcloog-isl.a" ] ; then
+make
+make install
+fi
+cd ../../..
+########################################
+# newlib
+########################################
+# Get the archives
+cd mips/orig
+if [ ! -e "newlib-${NEWLIBVERSION}.tar.gz" ] ; then
+  wget ftp://sourceware.org/pub/newlib/newlib-${NEWLIBVERSION}.tar.gz
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "newlib-${NEWLIBVERSION}" ] ; then
+tar -xvzf ../orig/newlib-${NEWLIBVERSION}.tar.gz
+fi
+cd ../..
+########################################
+# gcc first stage
+########################################
+# Get the archives
+cd mips/orig
+if [ ! -e "gcc-${GCCVERSION}.tar.bz2" ] ; then
+  wget ftp://ftp.halifax.rwth-aachen.de/gnu/gcc/gcc-${GCCVERSION}/gcc-${GCCVERSION}.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "gcc-${GCCVERSION}" ] ; then
+tar -xvjf ../orig/gcc-${GCCVERSION}.tar.bz2
+fi
+cd ../build
+mkdir -p gcc-stage1
+cd gcc-stage1
+if [ ! -e "config.status" ] ; then
+LDFLAGS="-Wl,-rpath,$MYMIPS/lib" \
+../../src/gcc-${GCCVERSION}/configure --target=mipsel-none-elf \
+--prefix=$MYMIPS \
+--with-gmp=$MYMIPS \
+--with-mpfr=$MYMIPS \
+--with-mpc=$MYMIPS \
+--with-isl=$MYMIPS \
+--with-newlib --without-headers \
+--disable-shared --disable-threads --disable-libssp \
+--disable-libgomp --disable-libmudflap \
+--enable-languages="c"
+fi
+if [ ! -e "${MYMIPS}/bin/mipsel-none-elf-gcc" ] ; then
+make all-gcc
+make install-gcc
+fi
+cd ../../..
+########################################
+# newlib
+########################################
+# Build
+cd mips/build
+mkdir -p newlib
+cd newlib
+if [ ! -e "config.status" ] ; then
+../../src/newlib-${NEWLIBVERSION}/configure --prefix=$MYMIPS --target=mipsel-none-elf
+fi
+if [ ! -e "${MYMIPS}/mipsel-none-elf/lib/libc.a" ] ; then
+make
+make install
+fi
+cd ../../..
+########################################
+# gcc second stage
+########################################
+cd mips/build
+mkdir -p gcc-stage2
+cd gcc-stage2
+if [ ! -e "config.status" ] ; then
+LDFLAGS="-Wl,-rpath,$MYMIPS/lib" \
+../../src/gcc-${GCCVERSION}/configure --target=mipsel-none-elf \
+--prefix=$MYMIPS \
+--with-gmp=$MYMIPS \
+--with-mpfr=$MYMIPS \
+--with-mpc=$MYMIPS \
+--with-isl=$MYMIPS \
+--with-newlib  \
+--disable-shared --disable-threads --disable-libssp \
+--disable-libgomp --disable-libmudflap \
+--enable-languages="c,c++"
+fi
+if [ ! -e "${MYMIPS}/bin/mipsel-none-elf-g++" ] ; then
+make all
+make install
+fi
+cd ../../..
+########################################
+# GDB
+########################################
+# Get the archives
+cd mips/orig
+if [ ! -e "gdb-${GDBVERSION}.tar.bz2" ] ; then
+  wget ftp://ftp.halifax.rwth-aachen.de/gnu/gdb/gdb-${GDBVERSION}.tar.bz2
+fi
+# Unpack to source directory
+cd ../src
+if [ ! -d "gdb-${GDBVERSION}" ] ; then
+tar -xvjf ../orig/gdb-${GDBVERSION}.tar.bz2
+fi
+cd ../build
+mkdir -p gdb
+cd gdb
+if [ ! -e "config.status" ] ; then
+../../src/gdb-${GDBVERSION}/configure --target=mipsel-none-elf  \
+--enable-sim-trace \
+--enable-sim-stdio \
+--prefix=$MYMIPS
+fi
+if [ ! -e "${MYMIPS}/bin/mipsel-none-elf-gdb" ] ; then
+make
+make install
+fi
+cd ../../..
+</code>
+===== Compile and Run an example =====
+Here is an example mini c code to test the compiler.
+<code c hello.c>
+/* Hello world */
+#include <stdio.h>
+int myfunc(int a, int b){
+  int k;
+  k = a + b;
+  k += 7;
+  k *= 6;
+  return k;
+}
+int main(){
+  int i,j,m;
+  j = 3;
+  m = 2;
+  for(i=0;i<5;i++){
+    m += myfunc(i,j);
+    printf("m is %d\n",m);
+  }
+  return 0;
+}
+</code>
+Compile to Assembler for viewing
+<code>
+mipsel-none-elf-gcc -S hello.c
+</code>
+The output assembler code is in hello.s.
+Compile and link ready for simulation with instruction set simulator
+<code>
+mipsel-none-elf-gcc -o hello -Tidt.ld hello.c
+</code>
+Run the code
+<code>
+mipsel-none-elf-run hello
+</code>
+=== Analyze ===
+Produce an annoted source code showing how often lines are executed.
+<code>
+gcc -fprofile-arcs -ftest-coverage -o hello hello.c
+./hello
+gcov hello.c
+</code>
+This produces the file hello.c.gcov showing the annotated source file.
+=== Tracing in instruction set simulator ===
+Run with instruction tracing in the simulator
+<code>
+mipsel-none-elf-gcc -Tidt.ld -o hello hello.c
+mipsel-none-elf-run --trace-insn=on --trace-file trace hello
+</code>
+===== Test the compiler =====
+<code>
+sudo apt-get install dejagnu
+</code>
+<code>
+cd
+cd mips/build/gcc-stage2
+make check-gcc RUNTESTFLAGS=--target_board=mips-sim
+</code>
+===== Install git and download a simple project  =====
+Install git and download a simple project
+<code>
+sudo apt-get install git
+cd
+mkdir projects
+cd projects
+git clone https://git.etech.fh-augsburg.de/friedrich.beckmann/myfirst.git
+</code>
+Now you have the simple project "myfirst" in your directory.
+=== Try the MIPS Cross Compiler ===
+Change to the src directory and compile the code with the cross compiler.
+<code>
+cd myfirst
+cd src
+mipsel-none-elf-gcc -S hello.c
+less hello.s
+</code>
+Now you have the compiled assembler code "hello.s". To compile to binary do:
+<code>
+mipsel-none-elf-gcc -o hello -Tidt.ld hello.c
+</code>
+Now you have the binary "hello". You can run the binary in the instruction set simulator with
+<code>
+mipsel-none-elf-run hello
+</code>
+This will run the binary with the mips instruction set simulator. You should see "Hello World".
+===== Open OCD =====
+[[dt_openocd]]