Betreff: Maschinenbau Verfahrenstechnik
Von: "Schweitzer Fachinformationen" <newsletter@newbooks.de>
Datum: 20.05.2018 12:47
An: angelika.hofmockel@hs-augsburg.de

Header
Abfallwirtschaft, Abfallentsorgung nach oben  nach oben     
 

Farid, Arvin / Chen, Hongxin (Hrsg.)

Proceedings of GeoShanghai 2018 International Conference: Geoenvironment and Geohazard

Springer
05/2018
Gebunden
EUR 213,99 [D] EUR 219,99 [A] CHF 220,00 GBP 179,99 USD 249,99
ISBN: 978-981-1301-27-8

This book is the seventh volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Geoenvironment and Geohazards”, presents the recent advances and technology in geoenvironmen ...

weitere Informationen

zu Warenkorb hinzufügen

 

Li, Lin / Cetin, Bora / Yang, Xiaoming (Hrsg.)

Proceedings of GeoShanghai 2018 International Conference: Ground Improvement and Geosynthetics

Springer
05/2018
Gebunden
EUR 213,99 [D] EUR 219,99 [A] CHF 220,00 GBP 179,99 USD 249,99
ISBN: 978-981-1301-21-6

This book is the eighth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This book, entitled Ground Improvement and Geosynthetics”, presents the latest information on the new technologies a ...

weitere Informationen

zu Warenkorb hinzufügen

 

Shi, Xianming / Liu, Zhen / Liu, Jenny (Hrsg.)

Proceedings of GeoShanghai 2018 International Conference: Transportation Geotechnics and Pavement Engineering

Springer
05/2018
Gebunden
EUR 171,19 [D] EUR 175,99 [A] CHF 176,00 GBP 139,99 USD 199,99
ISBN: 978-981-1300-10-3

This book is the fourth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Transportation Geotechnics and Pavement Engineering”, represents the recent advances and tech ...

weitere Informationen

zu Warenkorb hinzufügen

Bionik, Biomimetik nach oben  nach oben     
 

Tinello, Daniel

Innovative Fabriklayout- und Materialflussplanung anhand bionischer Systemdesignmuster

Logos
04/2018
Kartoniert
EUR 57,00 [D] EUR 58,60 [A]
ISBN: 978-3-8325-4681-6

Mithilfe der Bionik wurden im Laufe der vergangenen Jahre einige erfolgreiche Neuentwicklungen durchgeführt. Wäre die Bionik aber auch für Fabriken sinnvoll? Könnten diese in Zukunft wie Muscheln, Bienenwaben oder Spinnennetze aussehen? Ein Großte ...

weitere Informationen

zu Warenkorb hinzufügen

Biotechnologie nach oben  nach oben     
 

Masuda, Seiji / Izawa, Shingo (Hrsg.)

Applied RNA Bioscience

Springer
04/2018
Gebunden
EUR 160,49 [D] EUR 164,99 [A] CHF 165,00 GBP 129,99 USD 179,99
ISBN: 978-981-10-8371-6

The focus of this book is to introduce up-to-date information on applications and practical use of RNA for agriculture, biotechnology and medicine. It provides unique ideas, tools, and methods in detail from a variety of scientific and technical disc ...

weitere Informationen

zu Warenkorb hinzufügen

 

Piemonte, Vincenzo / Basile, Angelo / Ito, Taichi et al. (Hrsg.)

Biomedical Engineering Challenges
A Chemical Engineering Insight

Wiley
1. Auflage, 04/2018
Gebunden
EUR 149,00 [D]
ISBN: 978-1-119-29604-1

An important resource that puts the focus on the chemical engineering aspects of biomedical engineering In the past 50 years remarkable achievements have been advanced in the fields of biomedical and chemical engineering. With contributions from lea ...

weitere Informationen

zu Warenkorb hinzufügen

 

Pavlov, Atanas / Bley, Thomas (Hrsg.)

Bioprocessing of Plant In Vitro Systems

Springer
05/2018
Gebunden
EUR 406,59 [D] EUR 417,99 [A] CHF 418,00 GBP 329,99 USD 499,99
ISBN: 978-3-319-54599-8

This handbook presents how plant in vitro technologies can overcome current limitations in the production of important plant-derived substances. It explains the advantages of plant in vitro technologies, notably the independence from climatic and soi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Pavlov, Atanas / Bley, Thomas (Hrsg.)

Bioprocessing of Plant In Vitro Systems

Springer
05/2018
Mixed media product
EUR 632,47 [D] EUR 638,39 [A] CHF 626,50 GBP 499,50 USD 749,99
ISBN: 978-3-319-54601-8

This handbook presents how plant in vitro technologies can overcome current limitations in the production of important plant-derived substances. It explains the advantages of plant in vitro technologies, notably the independence from climatic and soi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Pavlov, Atanas / Bley, Thomas (Hrsg.)

Bioprocessing of Plant In Vitro Systems

Springer
04/2018
E-Book

ISBN: 978-3-319-54600-1

This handbook presents how plant in vitro technologies can overcome current limitations in the production of important plant-derived substances. It explains the advantages of plant in vitro technologies, notably the independence from climatic and soi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Brazauskas, Gintaras / Statkeviciute, Gražina / Jonaviciene, Kristina (Hrsg.)

Breeding Grasses and Protein Crops in the Era of Genomics

Springer
04/2018
Gebunden
EUR 53,49 [D] EUR 54,99 [A] CHF 66,61 GBP 44,99 USD 59,99
ISBN: 978-3-319-89577-2

This book includes papers presented at the 2017 Joint meeting of Fodder Crops and Amenity Grasses Section and Protein Crops Working Group of EUCARPIA-Oil and Protein Crops Section. The theme of the meeting “Breeding Grasses and Protein Crops in the E ...

weitere Informationen

zu Warenkorb hinzufügen

 

Lee, Sang Yup (Hrsg.)

Consequences of Microbial Interactions with Hydrocarbons, Oils, and Lipids: Production of Fuels and Chemicals

Springer
04/2018
Mixed media product
EUR 548,14 [D] EUR 553,28 [A] CHF 543,00 GBP 433,00 USD 599,00
ISBN: 978-3-319-50437-7

This book covers the current states of microbial and related technologies that have been developed for the efficient production of chemicals, fuels and materials by integrating strain and enzyme development, fermentation processes, and downstream pro ...

weitere Informationen

zu Warenkorb hinzufügen

 

Singh, Brahma / Peter, K.V. (Hrsg.)

New Age Herbals
Resource, Quality and Pharmacognosy

Springer
04/2018
Gebunden
EUR 160,49 [D] EUR 164,99 [A] CHF 165,00 GBP 129,99 USD 179,99
ISBN: 978-981-10-8290-0

Importance of herbs (medicinal plants) can hardly be overemphasized. They are exploited for manyfold applications, ranging from phytopharmaceuticals, to nutraceuticals, to cosmetics and many others. Keeping in view the richness of herbs and their vas ...

weitere Informationen

zu Warenkorb hinzufügen

 

Hao, Da-Cheng

Ranunculales Medicinal Plants
Biodiversity, Chemodiversity and Pharmacotherapy

William Andrew Publishing
04/2018
Kartoniert
EUR 116,63 [D] GBP 95,95
ISBN: 978-0-12-814232-5

Ranunculales Medicinal Plants: Biodiversity, Chemodiversity and Pharmacotherapy comprehensively covers this order of flowering plants, detailing the phytochemistry, chemotaxonomy, molecular biology, and phylogeny of selected medicinal plants families ...

weitere Informationen

zu Warenkorb hinzufügen

 

Smolke, Christina (Hrsg.). Reihe herausgegeben von Lee, Sang Yup / Nielsen, Jens / Stephanopoulos, Gregory

Synthetic Biology
Parts, Devices and Applications

WILEY-VCH
1. Auflage, 04/2018
Gebunden
EUR 149,00 [D]
ISBN: 978-3-527-33075-1

A review of the interdisciplinary field of synthetic biology, from genome design to spatial Engineering. Written by an international panel of experts, Synthetic Biology draws from various areas of research in biology and engineering and explores th ...

weitere Informationen

zu Warenkorb hinzufügen

Chemische Verfahrenstechnik nach oben  nach oben     
 

Murzin, Dmitry Yu.

Chemical Product Technology

De Gruyter
1. Auflage, 04/2018
E-Book
EUR 59,95 [D] EUR 59,95 [A]
ISBN: 978-3-11-047552-4

Chemical Product Technology focuses on materials chemistry and introduces industrial manufacturing technologies for different product types. The author presents a full cycle of product development for the materials that are used in everyday live, suc ...

weitere Informationen

zu Warenkorb hinzufügen

 

Murzin, Dmitry Yu.

Chemical Product Technology

De Gruyter
1. Auflage, 04/2018
E-Book
EUR 59,95 [D] EUR 59,95 [A]
ISBN: 978-3-11-047565-4

Chemical Product Technology focuses on materials chemistry and introduces industrial manufacturing technologies for different product types. The author presents a full cycle of product development for the materials that are used in everyday live, suc ...

weitere Informationen

zu Warenkorb hinzufügen

 

Roohinejad, Shahin / Greiner, Ralf / Oey, Indrawati et al. (Hrsg.)

Emulsion-based Systems for Delivery of Food Active Compounds
Formation, Application, Health and Safety

Wiley
1. Auflage, 04/2018
Gebunden
EUR 169,00 [D]
ISBN: 978-1-119-24714-2

A comprehensive text that offers a review of the delivery of food active compounds through emulsion-based systems Emulsion-based Systems for Delivery of Food Active Compounds is a comprehensive recourse that reviews the principles of emulsion-based ...

weitere Informationen

zu Warenkorb hinzufügen

Güterkraftverkehr, Spedition nach oben  nach oben     
 

Lemmer, Holger

Ladungssicherung kompakt
informieren – kontrollieren – sicher umsetzen

WEKA
04/2018
CD-ROM
EUR 320,11 [D] EUR 322,80 [A]
ISBN: 978-3-8111-6998-2

Wie sichere ich richtig? Mit dieser neuen Komplettlösung werden alle Themenbereiche der Ladungssicherung praxisnah und rechtskonform inkl. Anwendungshilfen abgebildet. Unsere brandneue digitale Komplettlösung Ladungssicherung in der Praxis gibt Ihnen ...

weitere Informationen

zu Warenkorb hinzufügen

 

Tankreinigung in Europa 2018/19

Storck Verlag
28. Auflage 2018, 06/2018
Kartoniert
EUR 18,99 [D]
ISBN: 978-3-86897-393-8

Die Tankinnenreinigung ist ein wesentlicher Faktor nicht nur in der Kostenrechnung des Spediteurs, sondern ein entscheidendes Qualitätsmerkmal für den Kunden. Strenge Auflagen der Behörden ebenso wie der Industrie bewirken immer stärkere Einschränkun ...

weitere Informationen

zu Warenkorb hinzufügen

Konstruktionslehre, Bauelemente, CAD nach oben  nach oben     
 

Haberkern, Anton

Maschinenelemente für Dummies

WILEY-VCH
1. Auflage, 04/2018
Kartoniert
EUR 22,99 [D]
ISBN: 978-3-527-71051-5

Maschinenelemente sind die Grundbausteine von Produktionsmaschinen, Fahrzeugen, Haushaltsgeräten und mechatronischen Geräten. Die Vielfalt reicht dabei von kleinen Verbindungselementen wie Schrauben über Kugellager bis zum komplexen Getriebe. "Maschi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Öchsner, Andreas / Merkel, Markus

One-Dimensional Finite Elements
An Introduction to the FE Method

Springer
2. Auflage (2nd ed. 2018), 05/2018
Gebunden
EUR 96,29 [D] EUR 98,99 [A] CHF 99,00 GBP 79,99 USD 109,99
ISBN: 978-3-319-75144-3

This textbook presents finite element methods using exclusively one-dimensional elements. It presents the complex methodology in an easily understandable but mathematically correct fashion. The approach of one-dimensional elements enables the reader ...

weitere Informationen

zu Warenkorb hinzufügen

Kontinuumsmechanik nach oben  nach oben     
 

Shao, Zhuoping / Wang, Fuli

The Fracture Mechanics of Plant Materials
Wood and Bamboo

Springer
05/2018
Gebunden
EUR 128,39 [D] EUR 131,99 [A] CHF 132,00 GBP 109,99 USD 149,99
ISBN: 978-981-10-9016-5

This book introduces readers to the application of fracture mechanics and mesomechanics to the analysis of the fracture behaviors of wood and bamboo. It presents a range of research methods to study the fracture behaviors of wood and bamboo, taking i ...

weitere Informationen

zu Warenkorb hinzufügen

Lebensmitteltechnologie und Getränketechnologie nach oben  nach oben     
 

Hopp, Vollrath

Chemische Kreisläufe in der Natur

Springer Spektrum
2. Aufl. 2018, 07/2018
Kartoniert
EUR 69,99 [D] EUR 71,95 [A] CHF 72,00 GBP 54,99 USD 79,99
ISBN: 978-3-662-55859-1

Das Buch beschreibt naturwissenschaftliche und technologische Zusammenhänge der Ernährung und Gesundheit aus biologischer, chemischer und biochemischer Sicht. Die Chemie ist die Wissenschaft vom Energie- und Stoffumsatz und den damit verbundenen Ä ...

weitere Informationen

zu Warenkorb hinzufügen

 

Sato, Kiyotaka (Hrsg.)

Crystallization of Lipids
Fundamentals and Applications in Food, Cosmetics, and Pharmaceuticals

Wiley
1. Auflage, 03/2018
Gebunden
EUR 219,00 [D]
ISBN: 978-1-118-59392-9

An authoritative reference that contains the most up-to-date information knowledge, approaches, and applications of lipid crystals Crystallization of Lipids is a comprehensive resource that offers the most current and emerging knowledge, techniques ...

weitere Informationen

zu Warenkorb hinzufügen

 

Deutsche Gesellschaft für Fettwissenschaft e.V. (Hrsg.)

DGF-Einheitsmethoden
Deutsche Einheitsmethoden zur Untersuchung von Fetten, Fettprodukten, Tensiden und verwandten Stoffen

Wissenschaftliche Verlagsgesellschaft
2. Auflage, 05/2018
Loseblattwerk
EUR 218,00 [D] EUR 224,20 [A]
ISBN: 978-3-8047-3808-9

Seit mehr als 50 Jahren sind die DGF-Einheitsmethoden das Standardwerk zur Untersuchung von Fetten, Fettprodukten, Tensiden und verwandten Stoffen. Die vierbändige Loseblattsammlung ist eine umfassende Zusammenstellung validierter Analysenverfahren, ...

weitere Informationen

zu Warenkorb hinzufügen

 

Food Chemicals Codex 11th edition 2018-2019 (FCC-USP)
incl. Supplement 1, 2 and 3

Deutscher Apotheker Verlag
1. Auflage, 04/2018
Gebunden
EUR 849,00 [D]
ISBN: 978-3-7692-7212-3

Internationally recognized standards to verify identity, quality, and purity of food ingredients The Food Chemicals Codex (FCC) in conjunction with USP Reference Materials enables manufacturers and suppliers to verify the identity, quality, and p ...

weitere Informationen

zu Warenkorb hinzufügen

 

Williot, Patrick / Nonnotte, Guy / Vizziano-Cantonnet, Denise et al. (Hrsg.)

The Siberian Sturgeon (Acipenser baerii, Brandt, 1869)

Springer
04/2018
Gebunden
EUR 319,93 [D] EUR 328,90 [A] CHF 329,00 GBP 262,50 USD 359,00
ISBN: 978-3-319-61925-5

This two-volume book set focuses on the Siberian sturgeon. Acipenser baerii Brandt 1869, one of the 27 “existing” sturgeon species, is a native species of the Siberian catchments, where – as in many other parts of the world – the sturgeon populations ...

weitere Informationen

zu Warenkorb hinzufügen

 

Williot, Patrick / Nonnotte, Guy / Chebanov, Mikhail (Hrsg.)

The Siberian Sturgeon (Acipenser baerii, Brandt, 1869) Volume 2 - Farming

Springer
04/2018
Gebunden
EUR 213,99 [D] EUR 219,99 [A] CHF 220,00 GBP 179,99 USD 249,99
ISBN: 978-3-319-61674-2

The Siberian sturgeon, Acipenser baerii Brandt 1869 is the most widely farmed sturgeon species. Continuing from Volume 1, which focuses on the biology of the species, the present Volume 2 in turn examines farming aspects. It is divided into six parts ...

weitere Informationen

zu Warenkorb hinzufügen

Luft- und Raumfahrttechnik, Luftverkehr nach oben  nach oben     
 

Elli, Mauro

Détente and Beyond
Some 25 Years of Anglo-Romanian Relations in the Aviation Industry (1966-1993)

Peter Lang
03/2018
Kartoniert
EUR 50,95 [D] EUR 52,80 [A] CHF 60,00 GBP 40,00 USD 57,95
ISBN: 978-2-8076-0674-6

By the mid-1960s, the whole European aviation industry had begun looking at two main solutions in order to survive competition from the USA: European cooperation, and exports to markets still closed to the Americans. Against this background, Anglo-Ro ...

weitere Informationen

zu Warenkorb hinzufügen

 

Hatton, Scott (Hrsg.)

Proceedings of the 13th Reinventing Space Conference

Springer
04/2018
Gebunden
EUR 245,03 [D] EUR 251,90 [A] CHF 252,00 GBP 199,99 USD 259,00
ISBN: 978-3-319-32816-4

Reinventing Space is the largest global conference and exhibition for one of the space industry’s fastest growing sectors. Over its 82-year history, the British Interplanetary Society has acted as a forum for new and innovative ideas and developments ...

weitere Informationen

zu Warenkorb hinzufügen

 

Hinsch, Martin

Qualitätsmanagement in der Luftfahrtindustrie
EN 9100:2016 - Einführung und Anwendung in der betrieblichen Praxis

Springer Vieweg
3., aktualisierte Aufl. 2018, 05/2018
Mixed media product
EUR 65,99 [D] EUR 67,56 [A] CHF 66,50 GBP 54,99 USD 74,99
ISBN: 978-3-662-56244-4

Die Europäische Norm EN 9100 ist die branchenspezifische Norm der Luftfahrt-, Raumfahrt- und Verteidigungsindustrie. Für die Zusammenarbeit mit einem Luftfahrtkonzern gilt eine Zertifizierung der Zulieferer nach dieser Norm i.d.R. als obligatorisch. ...

weitere Informationen

zu Warenkorb hinzufügen

Maschinenbau nach oben  nach oben     
 

Risikobeurteilungen für Maschinen
Konform mit der neuen EN ISO 12100!

WEKA
1. Auflage, 04/2018
CD-ROM
EUR 426,02 [D] EUR 429,60 [A]
ISBN: 978-3-8111-6976-0

Wir zeigen Ihnen, wie die Risikobeurteilungen nach aktuellen Normen der EN ISO 12100 korrekt aussehen. Eine exklusive, von CE-Experten entwickelte Sammlung. Eine exklusive, von CE-Experten entwickelte Sammlung praxisbewährter Beispiele Die Risikobe ...

weitere Informationen

zu Warenkorb hinzufügen

Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff nach oben  nach oben     
 

PytlikZillig, Lisa M. / Hutchens, Myiah J. / Muhlberger, Peter et al.

Deliberative Public Engagement with Science
An Empirical Investigation

Springer
05/2018
Kartoniert
EUR 21,39 [D] EUR 21,99 [A] CHF 22,00 GBP 17,99 USD 24,99
ISBN: 978-3-319-78159-4

This compact open access reference delves beyond popular concepts of educated consumers and an informed public by examining the science behind deliberative engagement. Using data from four longitudinal studies, the authors assess public engagement me ...

weitere Informationen

zu Warenkorb hinzufügen

 

Berardi, Anna C. (Hrsg.)

Extracellular Matrix for Tissue Engineering and Biomaterials

Humana Press
04/2018
Gebunden
EUR 160,49 [D] EUR 164,99 [A] CHF 165,00 GBP 129,99 USD 179,99
ISBN: 978-3-319-77021-5

This volume provides a state-of-art-report on the new methodologies in tissue engineering and developments in the biomaterials field based on the extracellular matrix-relevant discovery. Extracellular Matrix for Tissue Engineering and Biomaterials op ...

weitere Informationen

zu Warenkorb hinzufügen

 

Souza, Júlio C. M. / Hotza, Dachamir / Henriques, Bruno (Hrsg.)

Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications

William Andrew Publishing
04/2018
Kartoniert
EUR 176,55 [D] GBP 143,00
ISBN: 978-0-12-814621-7

Nanostructured Biomaterials for Cranio-maxillofacial and Oral Applications examines the combined impact of materials science, biomedical and chemical engineering, and biology to provide enhanced biomaterials for applications in maxillo-facial rehabil ...

weitere Informationen

zu Warenkorb hinzufügen

 

Oliveira, J. Miguel / Pina, Sandra / Reis, Rui L. et al. (Hrsg.)

Osteochondral Tissue Engineering
Nanotechnology, Scaffolding-Related Developments and Translation

Springer
05/2018
Gebunden
EUR 160,49 [D] EUR 164,99 [A] CHF 165,00 GBP 129,99 USD 179,99
ISBN: 978-3-319-76710-9

This book overviews the most recent developments in the field of osteochondral tissue engineering (OCTE) and presents challenges and strategies being developed that face not only bone and cartilage regeneration, but also establish osteochondral inter ...

weitere Informationen

zu Warenkorb hinzufügen

Materialwissenschaft: Elektronik, Optik nach oben  nach oben     
 

Böer, Karl W. / Pohl, Udo W.

Semiconductor Physics

Springer
03/2018
Mixed media product
EUR 997,52 [D] EUR 1006,87 [A] CHF 988,00 GBP 788,00 USD 1093,99
ISBN: 978-3-319-69149-7

This handbook gives a complete survey of the important topics and results in semiconductor physics. It addresses every fundamental principle and most research topics and areas of application in the field of semiconductor physics. Comprehensive inform ...

weitere Informationen

zu Warenkorb hinzufügen

Materialwissenschaft: Metallische Werkstoffe nach oben  nach oben     
 

Sommer, Karl / Heinz, Rudolf / Schöfer, Jörg

Verschleiß metallischer Werkstoffe
Erscheinungsformen sicher beurteilen

Springer Vieweg
3., neu bearb. Aufl. 2018, 05/2018
Mixed media product
EUR 71,56 [D] EUR 73,26 [A] CHF 72,00 GBP 54,99 USD 79,99
ISBN: 978-3-658-17850-5

Dieses Fachbuch ist vor allem für die praktische Arbeit des Ingenieurs gedacht und zeigt den richtigen Umgang anhand zahlreicher Schadensbeispiele. Außerdem gibt es zuverlässige Hilfestellung bei der Analyse und Beurteilung von Verschleißproblemen. W ...

weitere Informationen

zu Warenkorb hinzufügen

Materialwissenschaft: Verbundwerkstoffe nach oben  nach oben     
 

Kumar, Kaushik / Davim, J. Paulo (Hrsg.). Mit Beiträgen von Abdulrahman, Kamardeen O. / Abed, Alaaeddin M. H. / Faris M, AL-Oqla et al.

Hierarchical Composite Materials
Materials, Manufacturing, Engineering

De Gruyter
04/2018
Gebunden
EUR 139,95 [D] EUR 139,95 [A]
ISBN: 978-3-11-054400-8

Hierarchical Composite Materials provides an in-depth analysis of a class of advanced composites that have properties that are anisotropic due to structural organization at different length scales. Chapters address how ordering occurs from the atomic ...

weitere Informationen

zu Warenkorb hinzufügen

 

Altenbach, Holm / Altenbach, Johannes / Kissing, Wolfgang

Mechanics of Composite Structural Elements

Springer
2. Auflage (2nd ed. 2018), 04/2018
Gebunden
EUR 106,99 [D] EUR 109,99 [A] CHF 110,00 GBP 89,99 USD 119,99
ISBN: 978-981-10-8934-3

This second edition of the textbook presents a systematic introduction to the structural mechanics of composite components. The book focusses on modeling and calculation of sandwiches and laminated composites i.e. anisotropic material. The new editio ...

weitere Informationen

zu Warenkorb hinzufügen

Mathematik für Ingenieure nach oben  nach oben     
 

Barbu, Viorel

Controllability and Stabilization of Parabolic Equations

Birkhäuser
05/2018
Gebunden
EUR 139,09 [D] EUR 142,99 [A] CHF 143,00 GBP 109,99 USD 149,00
ISBN: 978-3-319-76665-2

This monograph presents controllability and stabilization methods in control theory that solve parabolic boundary value problems. Starting from foundational questions on Carleman inequalities for linear parabolic equations, the author addresses the c ...

weitere Informationen

zu Warenkorb hinzufügen

 

Abell, Martha L. L. / Braselton, James P.

Introductory Differential Equations

William Andrew Publishing
5. Auflage, 04/2018
Kartoniert
EUR 140,17 [D] GBP 115,00
ISBN: 978-0-12-814948-5

Introductory Differential Equations, Fifth Edition provides accessible explanations and new, robust sample problems. This valuable resource is appropriate for a first semester course in introductory ordinary differential equations (including Laplace ...

weitere Informationen

zu Warenkorb hinzufügen

 

Koop, Andreas / Moock, Hardy

Lineare Optimierung – eine anwendungsorientierte Einführung in Operations Research

Springer Spektrum
2. Aufl. 2018, 04/2018
Kartoniert
EUR 27,99 [D] EUR 28,77 [A] CHF 29,00 GBP 22,99 USD 39,99
ISBN: 978-3-662-56140-9

Leicht verständlich und praxisorientiert behandelt das vorliegende Buch die wesentlichsten Gebiete der Linearen Optimierung, einem Kernbereich des Operations Research. Es wendet sich an Studierende betriebswirtschaftlicher und technischer Diszipli ...

weitere Informationen

zu Warenkorb hinzufügen

 

Erven, Joachim / Schwägerl, Dietrich

Mathematik für angewandte Wissenschaften
Ein Lehrbuch für Ingenieure und Naturwissenschaftler

De Gruyter
5., korr. und erw. Aufl., 04/2018
E-Book
EUR 34,95 [D] EUR 34,95 [A]
ISBN: 978-3-11-053723-9

Grundlagen: Mengen, reelle Zahlen, elementare Funktionen, Grenzwerte; Lineare Algebra (wesentlich ergänzt): Vektorräume, lineare Gleichungssysteme, Matrizen, Eigenwerte, analytische Geometrie, Skalarprodukt, Norm; komplexe Zahlen: GAUSSsche Zahlenebe ...

weitere Informationen

zu Warenkorb hinzufügen

 

Erven, Joachim / Schwägerl, Dietrich

Mathematik für angewandte Wissenschaften
Ein Lehrbuch für Ingenieure und Naturwissenschaftler

De Gruyter
5., korr. und erw. Aufl., 04/2018
Kartoniert
EUR 34,95 [D] EUR 34,95 [A]
ISBN: 978-3-11-053694-2

Grundlagen: Mengen, reelle Zahlen, elementare Funktionen, Grenzwerte; Lineare Algebra (wesentlich ergänzt): Vektorräume, lineare Gleichungssysteme, Matrizen, Eigenwerte, analytische Geometrie, Skalarprodukt, Norm; komplexe Zahlen: GAUSSsche Zahlenebe ...

weitere Informationen

zu Warenkorb hinzufügen

 

Cramer, Erhard / Nešlehová, Johanna

Vorkurs Mathematik
Arbeitsbuch zum Studienbeginn in Bachelor-Studiengängen

Springer Spektrum
7., überarb. u. erg. Aufl. 2018, 06/2018
Kartoniert
EUR 27,99 [D] EUR 28,77 [A] CHF 29,00 GBP 22,99 USD 32,99
ISBN: 978-3-662-57493-5

Sie suchen zum Studienstart Unterstützung beim Auffrischen der notwendigen mathematischen Grundlagen und möchten vorhandene Lücken im Vorwissen schließen? Dann hilft Ihnen dieses Arbeitsbuch mit einer präzise und verständlich formulierten Schulmat ...

weitere Informationen

zu Warenkorb hinzufügen

Mechanische und Thermische Verfahrenstechnik nach oben  nach oben     
 

Liu, Y. A. / Wood, Kevin R. / Yu, Yueying

Design, Simulation and Optimization of Adsorptive and Chromatographic Separations
A Hands-On Approach

WILEY-VCH
1. Auflage, 04/2018
Gebunden
EUR 139,00 [D]
ISBN: 978-3-527-34469-7

A comprehensive resource to the construction, use, and modification of the wide variety of adsorptive and chromatographic separations Design, Simulation and Optimization of Adsorptive and Chromatographic Separations offers the information needed to ...

weitere Informationen

zu Warenkorb hinzufügen

Mechatronik, Mikrosysteme (MEMS), Nanosysteme nach oben  nach oben     
 

Grabow, Jörg

Mechatronische Netzwerke
Praxis und Anwendungen

De Gruyter
1. Auflage, 04/2018
Kartoniert
EUR 59,95 [D] EUR 59,95 [A]
ISBN: 978-3-11-047084-0

In Kombination mit den Grundlagen der Netzwerkanalyse, angelehnt an die Elektrotechnik, bieten die mechatronischen Netzwerke neuartige Lösungsansätze zur Beschreibung komplexer mechatronischer Systeme. Diese einheitliche Beschreibungsform ermöglicht ...

weitere Informationen

zu Warenkorb hinzufügen

 

Grabow, Jörg

Mechatronische Netzwerke
Praxis und Anwendungen

De Gruyter
1. Auflage, 04/2018
E-Book
EUR 59,95 [D] EUR 59,95 [A]
ISBN: 978-3-11-047095-6

In Kombination mit den Grundlagen der Netzwerkanalyse, angelehnt an die Elektrotechnik, bieten die mechatronischen Netzwerke neuartige Lösungsansätze zur Beschreibung komplexer mechatronischer Systeme. Diese einheitliche Beschreibungsform ermöglicht ...

weitere Informationen

zu Warenkorb hinzufügen

 

Grabow, Jörg

Mechatronische Netzwerke
Praxis und Anwendungen

De Gruyter
1. Auflage, 04/2018
E-Book
EUR 59,95 [D] EUR 59,95 [A]
ISBN: 978-3-11-047085-7

In Kombination mit den Grundlagen der Netzwerkanalyse, angelehnt an die Elektrotechnik, bieten die mechatronischen Netzwerke neuartige Lösungsansätze zur Beschreibung komplexer mechatronischer Systeme. Diese einheitliche Beschreibungsform ermöglicht ...

weitere Informationen

zu Warenkorb hinzufügen

 

Regtien, Paul P.L. / Dertien, Edwin

Sensors for Mechatronics

William Andrew Publishing
2. Auflage, 04/2018
Kartoniert
EUR 112,35 [D] GBP 91,95
ISBN: 978-0-12-813810-6

Sensors for Mechatronics, Second Edition offers an overview of the sensors and sensor systems required and applied in mechatronics. Emphasis lies on the physical background of the operating principles that is illustrated with examples of commercially ...

weitere Informationen

zu Warenkorb hinzufügen

Meerestechnik, ablandige Plattformen nach oben  nach oben     
 

Qiu, TONG / Tiwari, Binod / Zhang, Zhen (Hrsg.)

Proceedings of GeoShanghai 2018 International Conference: Advances in Soil Dynamics and Foundation Engineering

Springer
05/2018
Gebunden
EUR 246,09 [D] EUR 252,99 [A] CHF 253,00 GBP 199,99 USD 279,99
ISBN: 978-981-1301-30-8

This book is the sixth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Advances in Soil Dynamics and Foundation Engineering”, covers the recent advances and technolo ...

weitere Informationen

zu Warenkorb hinzufügen

Mess- und Automatisierungstechnik nach oben  nach oben     
 

Merz, Hermann / Hansemann, Thomas / Hübner, Christof. Übersetzt von Backer, James / Moser, Viktoriya / Greefe, Leena

Building Automation
Communication systems with EIB/KNX, LON and BACnet

Springer
2. Auflage (2nd ed. 2018), 04/2018
Gebunden
EUR 128,39 [D] EUR 131,99 [A] CHF 132,00 GBP 109,99 USD 149,99
ISBN: 978-3-319-73222-0

This book offers all important industrial communication systems for buildings in one single book! It stimulates a basic understanding of network and bus systems for the automation of buildings. After an introduction to EIB/KNX, LON und BACnet technol ...

weitere Informationen

zu Warenkorb hinzufügen

 

Raja, J / Ajay-D-Vimal Raj, P / Rajasekar, S

Practices in Power System Management in India

Springer
05/2018
Gebunden
EUR 128,39 [D] EUR 131,99 [A] CHF 132,00 GBP 109,99 USD 149,99
ISBN: 978-981-10-2971-4

This book presents the state-of-the-art methods and procedures necessary for operating a power system. It takes into account the theoretical investigations and practical considerations of the modern electrical power system. It highlights in a systema ...

weitere Informationen

zu Warenkorb hinzufügen

 

Keiper, Winfried / Milde, Anja / Volkwein, Stefan (Hrsg.)

Reduced-Order Modeling (ROM) for Simulation and Optimization
Powerful Algorithms as Key Enablers for Scientific Computing

Springer
04/2018
Gebunden
EUR 82,38 [D] EUR 84,69 [A] CHF 85,00 GBP 67,99 USD 89,99
ISBN: 978-3-319-75318-8

This edited monograph collects research contributions and addresses the advancement of efficient numerical procedures in the area of model order reduction (MOR) for simulation, optimization and control. The topical scope includes, but is not limited ...

weitere Informationen

zu Warenkorb hinzufügen

 

Hansen, Lee D. / Transtrum, Mark K. / Quinn, Colette F.

Titration Calorimetry
From Concept to Application

Springer
04/2018
Kartoniert
EUR 58,84 [D] EUR 60,49 [A] CHF 60,50 GBP 49,99 USD 69,99
ISBN: 978-3-319-78249-2

This Brief describes methods for calibration of titration calorimeters and calculation of the parameters together with test data sets. ITC (Isothermal Titration Calorimetry) is commonly used to determine stoichiometry, equilibrium constants, enthal ...

weitere Informationen

zu Warenkorb hinzufügen

Modellierung & Simulation nach oben  nach oben     
 

Silverman, Eric. Mit Beiträgen von Courgeau, Daniel / Franck, Robert / Bijak, Jakub et al.

Methodological Investigations in Agent-Based Modelling
With Applications for the Social Sciences

Springer
03/2018
Gebunden
EUR 53,49 [D] EUR 54,99 [A] CHF 66,61 GBP 44,99 USD 59,99
ISBN: 978-3-319-72406-5

This open access book examines the methodological complications of using complexity science concepts within the social science domain.  The opening chapters take the reader on a tour through the development of simulation methodologies in the fields o ...

weitere Informationen

zu Warenkorb hinzufügen

 

Langer, Ulrich / Amrhein, Wolfgang / Zulehner, Walter (Hrsg.)

Scientific Computing in Electrical Engineering
SCEE 2016, St. Wolfgang, Austria, October 2016

Springer
04/2018
Gebunden
EUR 155,14 [D] EUR 159,49 [A] CHF 159,50 GBP 127,50 USD 169,00
ISBN: 978-3-319-75537-3

This collection of selected papers presented at the 11th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in St. Wolfgang, Austria, in 2016, showcases the state of the art in SCEE. The aim of the SCEE 2016 c ...

weitere Informationen

zu Warenkorb hinzufügen

Nachhaltigkeit, Grüne Technologien nach oben  nach oben     
 

von Hauff, Michael / Schulz, Robin / Wagner, Robin

Deutschlands Nachhaltigkeitsstrategie

UTB
1. Auflage, 05/2018
Kartoniert
EUR 19,99 [D] EUR 20,60 [A] CHF 26,90
ISBN: 978-3-8252-5055-3

Im Januar 2017 veröffentlichte die Bundesregierung mit der Neuauflage der Nationalen Nachhaltigkeitsstrategie die Fortschreibung zu der erstmalig 2002 vorgelegten Strategie für nachhaltige Entwicklung, die eine grundlegende Neuorientierung erfahren h ...

weitere Informationen

zu Warenkorb hinzufügen

Nanotechnologie nach oben  nach oben     
 

Zhang, Jintao (Hrsg.). Mit Beiträgen von Zhang, Li Li / Baek, Jong-Beom / Zong, Yun et al.

Chemically Derived Graphene
Functionalization, Properties and Applications

Royal Society of Chemistry
05/2018
Gebunden
EUR 225,77 [D] GBP 169,00 USD 237,00
ISBN: 978-1-78801-080-1

The increasing interest in graphene, due to its unique properties and potential applications, is sparking intense research into chemically derived graphene. This book provides a comprehensive overview of the recent and state-of-the-art research on ch ...

weitere Informationen

zu Warenkorb hinzufügen

 

Ashrafuzzaman, Mohammad

Nanoscale Biophysics of the Cell

Springer
04/2018
Gebunden
EUR 139,09 [D] EUR 142,99 [A] CHF 143,00 GBP 109,99 USD 159,99
ISBN: 978-3-319-77463-3

Macroscopic cellular structures and functions are generally investigated using biological and biochemical approaches. But these methods are no longer adequate when one needs to penetrate deep into the small-scale structures and understand their funct ...

weitere Informationen

zu Warenkorb hinzufügen

Pharmazeutische Technologie nach oben  nach oben     
 

Begründet von Feiden, Karl. Sonstige Adaption von Blasius, Helga

Arzneimittelprüfrichtlinien
Sammlung nationaler und internationaler Richtlinien

Wissenschaftliche Verlagsgesellschaft
1. Auflage, 04/2018
Loseblattwerk
EUR 249,00 [D]
ISBN: 978-3-8047-3818-8

Das Standardwerk zur Arzneimittelprüfung Das Loseblattwerk enthält eine aktuelle Sammlung nationaler und internationaler Richtlinien und Leitlinien für die Prüfung von Arzneimitteln. Das Kompendium ist ein anerkanntes, umfassendes Standardwerk. ...

weitere Informationen

zu Warenkorb hinzufügen

 

Peace, Karl E. / Chen, Ding-Geng / Menon, Sandeep (Hrsg.)

Biopharmaceutical Applied Statistics Symposium
Volume 2: Biostatistical Analysis of Clinical Trials

Springer
05/2018
Gebunden
EUR 101,64 [D] EUR 104,49 [A] CHF 104,50 GBP 83,50 USD 109,00
ISBN: 978-981-10-7825-5

This BASS book Series publishes selected high-quality papers reflecting recent advances in the design and biostatistical analysis of biopharmaceutical experiments – particularly biopharmaceutical clinical trials.  The papers were selected from invite ...

weitere Informationen

zu Warenkorb hinzufügen

 

Nanotechnology-Based Targeted Drug Delivery Systems for Brain Tumors

William Andrew Publishing
04/2018
Kartoniert
EUR 165,85 [D] GBP 135,00
ISBN: 978-0-12-812218-1

Nanotechnology-Based Targeted Drug Delivery Systems for Brain Tumors addresses brain anatomy and tumors and the progress and challenges in delivering drugs across the blood brain barrier. Several chapters are devoted to the latest technologies and ad ...

weitere Informationen

zu Warenkorb hinzufügen

 

Ulloa-Aguirre, Alfredo / Tao, Ya-Xiong (Hrsg.)

Targeting Trafficking in Drug Development

Springer
04/2018
Gebunden
EUR 299,59 [D] EUR 307,99 [A] CHF 308,00 GBP 249,99 USD 349,99
ISBN: 978-3-319-74163-5

Cellular trafficking is only recently identified as a site for therapeutic intervention. This book provides up to date information on the mechanism for exploiting this area for drug development as well as a clear understanding of the individual compo ...

weitere Informationen

zu Warenkorb hinzufügen

 

Fahr, Alfred. Übersetzt von Scherphof, Gerrit L.

Voigt's Pharmaceutical Technology

Wiley
1. Auflage, 03/2018
Gebunden
EUR 112,00 [D]
ISBN: 978-1-118-97262-5

A textbook which is both comprehensive and comprehensible and that offers easy but scientifically sound reading to both students and professionals Now in its 12th edition in its native German, Voigt's Pharmaceutical Technology is an interdisciplinar ...

weitere Informationen

zu Warenkorb hinzufügen

Philosophie der Technik nach oben  nach oben     
 

Anders, Günther

Die Antiquiertheit des Menschen Bd. I: Über die Seele im Zeitalter der zweiten industriellen Revolution

C.H.Beck
4. Auflage, 05/2018
E-Book
EUR 15,99 [D]
ISBN: 978-3-406-72653-8

"Die drei Hauptthesen: daß wir der Perfektion unserer Produkte nicht gewachsen sind; daß wir mehr herstellen, als wir uns vorstellen und verantworten können; und daß wir glauben, das, was wir können, auch zu dürfen: diese drei Grundthesen sind angesi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Anders, Günther

Die Antiquiertheit des Menschen Bd. II: Über die Zerstörung des Lebens im Zeitalter der dritten industriellen Revolution

C.H.Beck
5. Auflage, 05/2018
E-Book
EUR 15,99 [D]
ISBN: 978-3-406-72654-5

"Die drei Hauptthesen: daß wir der Perfektion unserer Produkte nicht gewachsen sind; daß wir mehr herstellen, als wir uns vorstellen und verantworten können; und daß wir glauben, das, was wir können, auch zu dürfen: diese drei Grundthesen sind angesi ...

weitere Informationen

zu Warenkorb hinzufügen

 

Gill, Bernhard / Torma, Franziska / Zachmann, Karin (Hrsg.)

Mit Biofakten leben
Sprache und Materialität von Pflanzen und Lebensmitteln

Nomos
1. Auflage, 04/2018
Kartoniert
EUR 44,00 [D]
ISBN: 978-3-8487-4286-8

Dieser Band thematisiert Pflanzen und Lebensmittel als hochgradig artifizielle, aber dennoch lebendige Dinge und Wesen. Ausgehend vom technikphilosophischen Konzept der "Biofakte" (Nicole C. Karafyllis), analysieren die Autor/innen aktuelle und zeitg ...

weitere Informationen

zu Warenkorb hinzufügen

 

Richter, Philipp / Müller, Jan / Nerurkar, Michael (Hrsg.)

Möglichkeiten der Reflexion
Festschrift für Christoph Hubig

Nomos
1. Auflage, 05/2018
Kartoniert
EUR 64,00 [D]
ISBN: 978-3-8487-4329-2

Technik ist das allgemeine Medium menschlichen Handelns. „Technik“ muss insofern über die Grundstruktur von Zweck-Mittel-Relationen gedacht werden, die zugleich von der reflexiven Ermöglichung durch das Mittel als auch von der bestimmenden Festschrei ...

weitere Informationen

zu Warenkorb hinzufügen

 

Kornwachs, Klaus

Philosophie für Ingenieure

Carl Hanser
3., überarbeitete Auflage, 05/2018
Mixed media product
EUR 26,00 [D] EUR 26,80 [A]
ISBN: 978-3-446-45471-2

Warum versteht kein Mensch Bedienungsanleitungen? Was macht es zu einer solchen Qual, Fahrkartenautomaten der Deutschen Bahn ein Ticket zu entlocken? Wieso kann man viel mehr ausprobieren als wissen? Warum muss man bei Simulationen auf der Hut sein? ...

weitere Informationen

zu Warenkorb hinzufügen

Physik, Chemie für Ingenieure nach oben  nach oben     
 

Thomsen, Christian

Physik für Ingenieure für Dummies

WILEY-VCH
2. Auflage, 10/2018
Kartoniert
EUR 26,99 [D]
ISBN: 978-3-527-71536-7

Alles ist Physik und natürlich müssen sich angehende Ingenieure damit beschäftigen. Die Physik fällt Ihnen schwer? Ihnen fehlen die mathematischen Grundlagen? Keine Panik! Dieses Buch wird Ihnen helfen. Es enthält alles, was Sie über Mechanik, Thermo ...

weitere Informationen

zu Warenkorb hinzufügen

 

Berber, Joachim / Kacher, Heinz / Langer, Rudolf

Physik in Formeln und Tabellen

Springer Spektrum
13. Aufl. 2018, 06/2018
Kartoniert
EUR 27,99 [D] EUR 28,77 [A] CHF 29,00 GBP 22,99 USD 32,99
ISBN: 978-3-658-21804-1

Diese Formelsammlung fasst das Grundlagenwissen Physik für Studierende an Hochschulen zusammen. Das Buch beinhaltet sowohl allgemeine Gleichungen als auch solche für die häufigen Spezialfälle. Vor allem Übungs- und Prüfungsaufgaben aus vielen Gebiete ...

weitere Informationen

zu Warenkorb hinzufügen

Produktionstechnik nach oben  nach oben     
 

Tonchia, Stefano

Industrial Project Management
International Standards and Best Practices for Engineering and Construction Contracting

Springer
2. Auflage (2nd ed. 2018), 04/2018
Gebunden
EUR 85,59 [D] EUR 87,99 [A] CHF 88,00 GBP 70,50 USD 89,99
ISBN: 978-3-662-56327-4

This book describes the principles and techniques in Project Management as applied to Engineering & Construction Contracts (ECC), conforming with relevant international standards (PMI - IPMA - ISO 21500), and pursuing a fully company-wide, process-ba ...

weitere Informationen

zu Warenkorb hinzufügen

Schiffbau, Seeverkehr nach oben  nach oben     
 

Renilson, Martin

Submarine Hydrodynamics

Springer
2. Auflage (2nd ed. 2018), 05/2018
Gebunden
EUR 128,39 [D] EUR 131,99 [A] CHF 132,00 GBP 109,99 USD 149,99
ISBN: 978-3-319-79056-5

This book covers specific aspects of submarine hydrodynamics in a very practical manner. The author reviews basic concepts of ship hydrodynamics and goes on to show how they are applied to submarines, including a look at the use of physical model exp ...

weitere Informationen

zu Warenkorb hinzufügen

Strömungslehre nach oben  nach oben     
 

Montomoli, Francesco (Hrsg.)

Uncertainty Quantification in Computational Fluid Dynamics and Aircraft Engines

Springer
2. Auflage (2nd ed. 2019), 08/2018
Gebunden
EUR 149,79 [D] EUR 153,99 [A] CHF 154,00 GBP 119,99 USD 169,99
ISBN: 978-3-319-92942-2

This book introduces design techniques developed to increase the safety of aircraft engines, and demonstrates how the application of stochastic methods can overcome problems in the accurate prediction of engine lift caused by manufacturing error. Thi ...

weitere Informationen

zu Warenkorb hinzufügen

Technikgeschichte nach oben  nach oben     
 

Hülsenberg, Dagmar

Alexander von Humboldts Überlegungen zu speziellen Glaserzeugnissen

S. Hirzel
1. Auflage, 04/2018
Kartoniert
EUR 11,00 [D] EUR 11,40 [A]
ISBN: 978-3-7776-2746-5

Während seiner Tätigkeit als Bergassessor, Oberbergmann und dann Oberbergrat in der Zeit von 1792 bis Anfang 1797 standen bergbauliche Aufgaben im Mittelpunkt der Tätigkeit Alexander von Humboldts. Dazu gehörte auch die Produktion in Salinen, Porzell ...

weitere Informationen

zu Warenkorb hinzufügen

 

Jungnickel, Kat

Bikes and Bloomers
Victorian Women Inventors and their Extraordinary Cycle Wear

Princeton University Press
05/2018
Gebunden
GBP 24,00 USD 29,95
ISBN: 978-1-906897-75-8

An illustrated history of the evolution of British women's cycle wear.The bicycle in Victorian Britain is often celebrated as a vehicle of women's liberation. Less noted is another critical technology with which women forged new and mobile public liv ...

weitere Informationen

zu Warenkorb hinzufügen

 

Schütte, Johann

Der Luftschiffbau Schütte-Lanz 
1909 - 1925

SEVERUS Verlag
1. angepasste Auflage (Nachdruck der Originalausgabe von 1929), 05/2018
Gebunden
EUR 34,90 [D] EUR 34,90 [A] CHF 42,00 GBP 34,99 USD 52,99
ISBN: 978-3-95801-659-0

Der Ingenieur und Unternehmer Johann Schütte (1873–1940) verfasst hier eine Abhandlung zu dem vom ihm mitbegründeten Unternehmen Luftschiffbau Schütte-Lanz, das der stärkste Konkurrent Zeppelins wurde, aber nach dem Versailler Vertrag aufgelöst wurde ...

weitere Informationen

zu Warenkorb hinzufügen

 

Marcus, Alan I. / Segal, Howard P.

Technology in America
A Brief History

Palgrave
3. Auflage (3rd ed. 2018), 04/2018
Kartoniert
EUR 29,95 [D] EUR 30,79 [A] CHF 31,00 GBP 22,99 USD 34,99
ISBN: 978-1-137-33485-5

Now in a thoroughly updated new edition, this successful textbook surveys the history of technology in America from the 1600s to the 21st century. Alan I Marcus and Howard P. Segal explore the effect society, culture, politics and economics have had ...

weitere Informationen

zu Warenkorb hinzufügen

 

Marcus, Alan I. / Segal, Howard P.

Technology in America
A Brief History

Palgrave
3. Auflage (3rd ed. 2018), 04/2018
Gebunden
EUR 74,89 [D] EUR 76,99 [A] CHF 77,00 GBP 60,00 USD 84,99
ISBN: 978-1-137-33486-2

Now in a thoroughly updated new edition, this successful textbook surveys the history of technology in America from the 1600s to the 21st century. Alan I Marcus and Howard P. Segal explore the effect society, culture, politics and economics have had ...

weitere Informationen

zu Warenkorb hinzufügen

Technische Mechanik | Werkstoffkunde nach oben  nach oben     
 

Giga, Yoshikazu / Novotný, Antonín (Hrsg.)

Handbook of Mathematical Analysis in Mechanics of Viscous Fluids

Springer
05/2018
Mixed media product
EUR 2413,38 [D] EUR 2436,00 [A] CHF 2390,50 GBP 1906,00 USD 2625,00
ISBN: 978-3-319-13345-4

Mathematics has always played a key role for researches in fluid mechanics. The purpose of this handbook is to give an overview of items that are key to handling problems in fluid mechanics. Since the field of fluid mechanics is huge, it is almost im ...

weitere Informationen

zu Warenkorb hinzufügen

 

Giga, Yoshikazu / Novotný, Antonín (Hrsg.)

Handbook of Mathematical Analysis in Mechanics of Viscous Fluids

Springer
05/2018
Gebunden
EUR 1551,50 [D] EUR 1595,00 [A] CHF 1594,00 GBP 1299,99 USD 1750,00
ISBN: 978-3-319-13343-0

Mathematics has always played a key role for researches in fluid mechanics. The purpose of this handbook is to give an overview of items that are key to handling problems in fluid mechanics. Since the field of fluid mechanics is huge, it is almost im ...

weitere Informationen

zu Warenkorb hinzufügen

 

Kutner, Wlodzimierz / Sharma, Piyush Sindhu (Hrsg.). Mit Beiträgen von Ken, Shimizu / Piletsky, Sergey / Huynh, Tan-Phat et al.

Molecularly Imprinted Polymers for Analytical Chemistry Applications

Royal Society of Chemistry
04/2018
Gebunden
EUR 239,68 [D] GBP 179,00 USD 251,00
ISBN: 978-1-78262-647-3

There is great interest in the preparation of synthetic receptor-based recognition units for cheap, robust, economic, and selective chemical sensors. Molecular imprinting provides the technology to prepare these synthetic units. There are still more ...

weitere Informationen

zu Warenkorb hinzufügen

 

Kulisch, Wilhelm

Technische Mechanik für Dummies

WILEY-VCH
3. Auflage, 04/2018
Kartoniert
EUR 24,99 [D]
ISBN: 978-3-527-71488-9

Dieses Buch vermittelt Ihnen genau die Grundgesetze der Mechanik, die für Sie als angehender Ingenieur relevant sind. Die Mathematik in diesem Buch ist so einfach wie möglich gehalten, wichtige Inhalte werden - ebenso wie die notwendigen physikalisch ...

weitere Informationen

zu Warenkorb hinzufügen

Technische Thermodynamik nach oben  nach oben     
 

Moñino, Antonio / Medina-López, Encarnación / Bergillos, Rafael J. et al.

Thermodynamics and Morphodynamics in Wave Energy

Springer
05/2018
Kartoniert
EUR 58,84 [D] EUR 60,49 [A] CHF 60,50 GBP 49,99 USD 69,99
ISBN: 978-3-319-90700-0

This book examines the performance of oscillating water column (OWC) wave energy converters. It discusses the influence of humid air inside the chamber and changes in the seabed, and also investigates the role of wave energy converters in coastal pro ...

weitere Informationen

zu Warenkorb hinzufügen

Technische Zuverlässigkeit, Sicherheitstechnik nach oben  nach oben     
 

Wolf, Heike

Der Strahlenschtzbeauftragte in Medizin und Technik
Der ideale Praxisratgeber für die Umsetzung der Strahlenschutz- und Röntgenverordnung

WEKA
1. Auflage, 04/2018
CD-ROM
EUR 355,81 [D] EUR 358,80 [A]
ISBN: 978-3-8111-1320-6

Der ideale Praxisratgeber für die Umsetzung der Strahlenschutz- und Röntgenverordnung. Gesicherte Fachinformationen bringen die Anforderungen Sie auf den Punkt und praktische Vorlagen helfen Ihnen bei der Umsetzung. Die Inhalte und Forderungen der St ...

weitere Informationen

zu Warenkorb hinzufügen

 

Hauke, Rudolf

Elektromagnetische Verträglichkeit nach neuer Richtlinie 2014/30/EU
Achtung: Seit dem 20.4.2016 muss die neue EMV-Richtlinie angewandt werden!

WEKA
05/2018
CD-ROM
EUR 235,62 [D] EUR 237,60 [A]
ISBN: 978-3-8111-4381-4

So haben Sie die neue EMV-Richtlinie 2014/30/EU perfekt im Griff! Fachbeiträge, Normsteckbriefe, Check- und Prüflisten sowie viele weitere Arbeitshilfen sorgen dafür, dass Sie die EMV schnell und effizient gewährleisten. Die Praxislösung „Elektromagn ...

weitere Informationen

zu Warenkorb hinzufügen

 

Möller, Niklas / Ove Hansson, Sven / Holmberg, Jan-Erik et al. (Hrsg.)

Handbook of Safety Principles

Wiley
1. Auflage, 04/2018
Gebunden
EUR 155,00 [D]
ISBN: 978-1-118-95069-2

Presents recent breakthroughs in the theory, methods, and applications of safety and risk analysis for safety engineers, risk analysts, and policy makers Safety principles are paramount to addressing structured handling of safety concerns in all tec ...

weitere Informationen

zu Warenkorb hinzufügen

 

Laufs, Paul

Reaktorsicherheit für Leistungskernkraftwerke 1
Die Entwicklung im politischen und technischen Umfeld der Bundesrepublik Deutschland

Springer Vieweg
2. Aufl. 2018, 05/2018
Gebunden
EUR 124,99 [D] EUR 128,49 [A] CHF 128,50 GBP 102,50 USD 149,00
ISBN: 978-3-662-53452-6

In dem Band wird die Entwicklung der Reaktorsicherheit in deutschen Leichtwasser-Kernkraftwerken nachgezeichnet. Dabei wird auf die Rolle internationaler Vorbilder ebenso Bezug genommen wie auf nationale und internationale Risikostudien. Anhand des B ...

weitere Informationen

zu Warenkorb hinzufügen

Technologie: Soziale & Ethische Aspekte nach oben  nach oben     
 

Broussard, Meredith

Artificial Unintelligence
How Computers Misunderstand the World

MIT Press
04/2018
Gebunden
GBP 20,00 USD 24,95
ISBN: 978-0-262-03800-3

A guide to understanding the inner workings and outer limits of technology and why we should never assume that computers always get it right.In Artificial Unintelligence, Meredith Broussard argues that our collective enthusiasm for applying computer ...

weitere Informationen

zu Warenkorb hinzufügen

 

Maitland, Carleen / Braman, Sandra / Jaeger, Paul T. (Hrsg.)

Digital Lifeline?
ICTs for Refugees and Displaced Persons

MIT Press
05/2018
Kartoniert
GBP 35,00 USD 45,00
ISBN: 978-0-262-53508-3

Interdisciplinary perspectives on the role of new information technologies, including mobile phones, wireless networks, and biometric identification, in the global refugee crisis.Today's global refugee crisis has mobilized humanitarian efforts to hel ...

weitere Informationen

zu Warenkorb hinzufügen

Triebwerkstechnik, Energieübertragung nach oben  nach oben     
 

Jamieson, Peter

Innovation in Wind Turbine Design

Wiley
2. Auflage, 03/2018
Gebunden
EUR 102,00 [D]
ISBN: 978-1-119-13790-0

Aktualisiert und erweiterte Neuauflage dieses umfassenden Leitfadens zu Innovationen in der Entwicklung von Windkraftanlagen Die 2. Auflage von Innovation in Wind Turbine Design beschäftigt sich im Detail mit den Designgrundlagen, erläutert die Ents ...

weitere Informationen

zu Warenkorb hinzufügen

Umwelttechnik nach oben  nach oben     
 

Mao, Jiansu / Li, Chunhui / Pei, Yuansheng et al.

Circular Economy and Sustainable Development Enterprises

Springer
03/2018
Gebunden
EUR 85,59 [D] EUR 87,99 [A] CHF 88,00 GBP 69,99 USD 99,99
ISBN: 978-981-10-8523-9

This textbook systematically addresses why and how Circular Economy should be developed and practiced by employing a Discussion and Research (D&R) teaching method. This method allows us to show the whole process of academic research, from formulating ...

weitere Informationen

zu Warenkorb hinzufügen

 

Förstner, Ulrich / Köster, Stephan

Umweltschutztechnik

Springer Vieweg
9. Aufl. 2018, 04/2018
Gebunden
EUR 64,99 [D] EUR 66,81 [A] CHF 67,00 GBP 53,99 USD 79,99
ISBN: 978-3-662-55162-2

Das Kompendium bietet einen Überblick über Grundlagen, Methoden und Vorschriften zum Technischen Umweltschutz, einschließlich der ethischen, sozialen, rechtlichen und wirtschaftlichen Fragen. Nachdem bereits die Schwerpunkte der 7. Auflage im Hinblic ...

weitere Informationen

zu Warenkorb hinzufügen

Verfahrenstechnik, Chemieingenieurwesen nach oben  nach oben     
 

Engel, Thomas / Gasteiger, Johann (Hrsg.)

Applied Chemoinformatics
Achievements and Future Opportunities

WILEY-VCH
1. Auflage, 04/2018
Kartoniert
EUR 129,00 [D]
ISBN: 978-3-527-34201-3

Edited by world-famous pioneers in chemoinformatics, this is a clearly structured and applications-oriented approach to the topic, providing up-to-date and focused information on the wide range of applications in this exciting field. The authors exp ...

weitere Informationen

zu Warenkorb hinzufügen

 

Travis, Anthony S.

Nitrogen Capture
The Growth of an International Industry (1900–1940)

Springer
05/2018
Gebunden
EUR 160,49 [D] EUR 164,99 [A] CHF 165,00 GBP 131,50 USD 189,00
ISBN: 978-3-319-68962-3

This monograph provides an account of how the synthetic nitrogen industry became the forerunner of the 20th-century chemical industry in Europe, the United States and Asia. Based on an earlier SpringerBrief by the same author, which focused on the pe ...

weitere Informationen

zu Warenkorb hinzufügen

Verkehrstechnologie: Allgemeines nach oben  nach oben     
 

Bruglieri, Maurizio (Hrsg.)

Multidisciplinary Design of Sharing Services

Springer
04/2018
Gebunden
EUR 123,04 [D] EUR 126,49 [A] CHF 126,50 GBP 101,00 USD 129,00
ISBN: 978-3-319-78098-6

This book explores all aspects of the sharing economy, pursuing a multidisciplinary approach encompassing Service Design, Spatial Design, Sociology, Economics, Law, and Transport and Operations Research. The book develops a unified vision of sharing ...

weitere Informationen

zu Warenkorb hinzufügen

Weinherstellungsverfahren nach oben  nach oben     
 

Demossier, Marion

Burgundy
A Global Anthropology of Place and Taste

Berghahn
1. Auflage, 04/2018
Gebunden
GBP 85,00 USD 120,00
ISBN: 978-1-78533-851-9

Drawing on more than twenty years of fieldwork, this book explores the professional, social, and cultural world of Burgundy wines, the role of terroir, and its transnational deployment in China, Japan, South Korea, and New Zealand. It demystifies the ...

weitere Informationen

zu Warenkorb hinzufügen

Werkstoffprüfung nach oben  nach oben     
 

Liu, Bin (Hrsg.)

Conjugated Polymers for Biological and Biomedical Applications

WILEY-VCH
1. Auflage, 04/2018
Gebunden
EUR 149,00 [D]
ISBN: 978-3-527-34273-0

This first book to specifically focus on applications of conjugated polymers in the fields of biology and biomedicine covers materials science, physical principles, and nanotechnology. The editor and authors, all pioneers and experts with extensive ...

weitere Informationen

zu Warenkorb hinzufügen

Werkzeugbau nach oben  nach oben     
 

Fräswerkzeuge

Beuth
5. Auflage, 04/2018
Kartoniert
EUR 246,00 [D]
ISBN: 978-3-410-28338-6

Das DIN-Taschenbuch 167 "Fräswerkzeuge" enthält Normen über Werkzeug-Grundlagen, Fräswerkzeuge und ergänzende Regelwerke. Es informiert den Anwender über genormte Begriffe und deren Benennungen, Haupt- und Anschlussmaße für die Austauschbarkeit, Lief ...

weitere Informationen

zu Warenkorb hinzufügen



Falls Sie Ihren Newsletter bearbeiten oder abbestellen möchten, klicken Sie bitte hier:

Newsletter verwalten


Schweitzer Fachinformationen oHG, Elsenheimerstraße 41-43, 80687 München
Tel: +49 89 55134-0, Fax: +49 89 55134-100, E-Mail: info@schweitzer-online.de 
AG München: HRA 97914, UID: DE 283 556 932, verantwortlich nach §55 RStV: Philipp Neie

Copyright © 2013 NEWBOOKS Services