[[flash_prepare_pi_zero_image]]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
flash_prepare_pi_zero_image [2020/02/19 12:55]
wf68spef
flash_prepare_pi_zero_image [2021/07/16 20:21] (current)
wf68spef
Line 1: Line 1:
 Each camera in the plane is driven by a pi zero. There is a prepared image for this usecase, but some planespecific parameters need to be set for each image.  ​ Each camera in the plane is driven by a pi zero. There is a prepared image for this usecase, but some planespecific parameters need to be set for each image.  ​
  
-  * Download image from Gitlab: ​https://gitlab.com/​searchwing/​development/​searchwing-pi-gen +  * Follow instructions ​from https://kidslab.gitbook.io/​searchwing/​preparing-components/software-setup/setup-companion-computer
-  * Flash image to SD Card (e.g. using Etcher Tool) +
-  * Set HostName to a unique name in ''​/etc/​hostname'' ​ and in ''/​etc/​hosts''​ : e.g. Freddy-cam-l +
-  * Set Accesspoint depending on left right camera in ''/​etc/​wpa_supplicant/​wpa_supplicant.conf''​ : +
- +
-  cam-r : AP1 +
-  cam-l : AP2 +
- +
-<​code>​ +
-network={ +
-        ssid="​AP1"​ +
-        psk="​AP-Password"​ +
-+
-</​code>​ +
-  * Insert image into plane and power up +
-  * First bootup the filesystem of image (~2Gb) is enlarged to the SD-Card size (64Gb) +
-    * Implemented by creating a ''/​data''​ partition where the image will be saved +
-    * Takes ~3-5Minutes  +
-    * Afterwards filesystem resize the camera-capture & webserver service is started  +
-  * You can access each camera via its hostname: ssh searchwing@Freddy-cam-l.local +
-  * The recorded images can be checked via webserver in the webbrowser: e.g. http:​\\Freddy-cam-l.local +
-  * Preflightcheck can be done with the searchwing-pi-manager on the laptop+
  • flash_prepare_pi_zero_image.1582113331.txt.gz
  • Last modified: 2020/02/19 12:55
  • by wf68spef