Differences

This shows you the differences between two versions of the page.

--- searchwing-image-download-station [2020/02/16 14:23]
wf68spef
+++ searchwing-image-download-station [2020/02/28 22:53]
beckmanf [setup Laptop] added eduroam setup
@@ Line 1: / Line 1: @@
 ===== Image Download station =====
-The images are stored on the two Raspberry Pi Zeros. The Image download station provides image download via two parallel Wifi links from the drone. The image download station is based on two [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access points.
+The images are stored on the two Raspberry Pi Zeros. The Image download station provides image download via two parallel Wifi links from the drone. The image download station is based on two [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access points. The datatransfer itself is handled by rsync via its rsync protocoll which doesnt rely on SSH. SSH is not used as the pi zero is not fast enough to encrypt the huge data we want to transfer for each flight.
+==== Access points ====
+=== AP1 ===
+This is the main router which provides DHCP service.
+Router IP: 192.168.8.1
+Admin password: XXXXXXXXXXXXXXX
+WAN Port is Lan Port
+.4 GHz SSID: SW-AP1
+Channel 1
+WIFI Password: XXXXXX
+TX Power: 10 dBm
+MBit
+GHz SSID: SW-AP1-5G
+Channel 36
+WIFI Password: XXXXX
+TX Power: 20 dbm
+=== AP2 ===
+This router is connected with the WAN port to a LAN port of AP1.
+Router IP: 192.168.8.200
+Admin Password: XXXXX
+WAN Port is Lan Port
+.4 GHz SSID: SW-AP2
+Channel 11
+WIFI Password: XXXXX
+TX Power: 10 dBm
+GHz SSID: SW-AP2-5G
+WIFI Password: XXXXX
+Channel: 44
+MBit
+TX Power: 20 dbm
 ====  setup Laptop ====
-configure datastorage with rsync in ''/etc/rsyncd.conf'' on ship laptop
+The laptop is a ASUS TUF FX505DV 8/512 R5-3550H RXT2060 with
+  * AMD Ryzen 3550H CPU
+  * 8 GB DDR4-SDRAM
+  * 512 GB SSD
+  * 15.6" Full HD 1920x1080 IPS screen
+  * AMD Radeon Vega 8 GPU
+  * NVIDIA GeForce RTX 2060 (6GB GDDR6) GPU
+  * LAN
+  * Dual-band WLAN
+  * Bluetooth
+running Ubuntu 18.04 LTS (Bionic Beaver)
+=== rsync ===
+Configure datastorage with rsync in ''/etc/rsyncd.conf'' on ship laptop.
+Each flight should have a unique name and needs two folders to be configured.
+e.g.
 <code>
-[camimages]
+[ringo-05032020_0915h-cam-r]
-path=/home/USER/camimages
+path=/home/USER/flightdata/ringo-05032020_0915h-cam-r
+hosts allow = *
+list = true
+uid = root
+gid = root
+read only = false
+[ringo-05032020_0915h-cam-l]
+path=/home/USER/flightdata/ringo-05032020_0915h-cam-l
 hosts allow = *
 list = true
@@ Line 15: / Line 87: @@
 read only = false
 </code>
+__**IMPORTANT** Please add cam-r or cam-l at the end, as this encoding is needed for the searchwing-gui to work in correct manner **IMPORTANT**__
 start rsync daemon on ship laptop
@@ Line 20: / Line 95: @@
   sudo systemctl start rsync
-run datatransfer task on each pi ( later triggered via script @ groundcontrol pc)
-  rsync /data/bilder/* rsync://GROUNDSTATIONIP/camimages
+=== eduroam ===
+Eduroam does not work with the default wpasupplicant 2.6 version. I have made a backport of wpasupplicant 2.9 from Ubuntu 19.10.
+{{ ::wpasupplicant_2.9-1ubuntu2_amd64.zip | wpasupplicant package 2.9 }}
+You need to install that package. Please download from this wiki and unzip it.
+<code>
+sudo apt install libnl-route-3-200
+dpkg -i wpasupplicant_2.9-1ubuntu2_amd64.deb
+</code>
+Check that the wpa supplicant service is running with
+<code>
+sudo systemctl status wpa_supplicant.service
+</code>
+In the Wifi Settings for eduroam choose in the "security" settings
+  * Security: WPA & WPA2 Enterprise
+  * Authentication: Tunneled TLS
+  * Anonymous identity: eduroam@hs-augsburg.de
+  * Check "No CA certificate is required"
+  * Inner Authentication: PAP
+  * Username: YOURUSERNAME@hs-augsburg.de
+  * Password: YOURPASSWORD
+====  transfer images ====
+run datatransfer task on each pi ( later triggered via script @ groundcontrol pc): e.g.
+  rsync -avv -u --progress -h /data/bilder/ rsync://GROUNDSTATIONIP/ringo-05032020_0915h-cam-r
+Don't use the -z option which compresses the data. The images are already compressed and the CPU load will result in 1 MB/s transfer rate compared to 3-4 MB/s without the -z option. (Beck, 23.2.20)
+====  troubleshooting ====
+  rsync error: error starting client-server protocol (code 5) at main.c(1675) [sender=3.1.3]
+Check if folder on receiverside exists.
+To get an idea whats the cause of the error - checkout rsync service status on receiverside (laptop):
+  sudo systemctl status rsync