This is an old revision of the document!
Raspberry Pi and Camera
We use the Raspberry Pi Zero W with the https://www.raspberrypi.org/products/camera-module-v2/Raspberry Camera v2. The camera is mounted in the https://cad.onshape.com/documents/23ec05703011cd53e3c6b8e1/w/8d98882fff32ec1e039ce0df/e/78db55b2eaec4a20a8812a5cCamera Pipe.
Camera in Pipe
- Seal the camera with Elastosil. Use the pink dispenser needle with 0.58mm diameter
- Add the 15cm Pi Zero camera cable
- Fix the camera connector with hotmelt
- Glue the camera with UHU Por
Raspberry UART Cable
The Raspberry 40 pin header must be connected to the PixRacer Telem2 and the power supply from the power module.