This is an old revision of the document!
Testing the temperature inside the plane
As the waterproof plane does not have any venting, we need to make sure that the temperature inside the plane doesnt get to high.
Test Setup
Mainly the ESC produces a lot of waste
Current: 4.24 A
Start - 24° C
10min - 40° C
15min - 43° C - 4.22 A - 15.35 V - Consumed 1200 mAh
| Time m | Temperature ° C | A | Vo | mAh |
|---|---|---|---|---|
| 0 | 24 | |||
| 10 | 40 | |||
| 15 | 43 | 4.22 | 15.35 | 1200 |
| 20 | 44 | 4.14 | 15.18 | 1500 |
| 25 | 45 | 4.06 | 15.00 | 1850 |
| 30 | 45 | 4.01 | 14.87 | 2150 |
| 35 | 45 | 3.91 | 14.71 | 2460 |
| 40 | 45 | 3.85 | 14.54 | 2770 |
| 45 | 45 | 3.74 | 14.32 | 3130 |
Voltage of the battery after test: 14.30 Volt (3,57 V per cell)
Ende: 50m - 3.70A, 14.16V, 27% anzeige - 3.500 mAh
1min - 100% Thrust - 46° C - no stronger temperature on 20A current.
Battery capacity
Charging the battery: 4500 mAh