Differences

This shows you the differences between two versions of the page.

--- vcae-lubuntu-18.04 [2019/03/28 16:34]
beckmanf added modelsim linux_rh60 problem
+++ vcae-lubuntu-18.04 [2020/03/22 20:51]
beckmanf typo
@@ Line 1: / Line 1: @@
-===== Install Quartus 18.1 on Lubuntu 18.04 LTS =====
+===== Install Quartus 18.1 and Matlab =====
+This description assumes that version 13.0sp1 is already installed on Lubuntu 18.04. The Quartus 18.1 version is used only by the Master Course.
 ==== Download ====
-Download [[https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar|Quartus-lite-18.1.0.625-linux.tar]] from [[http://fpgasoftware.intel.com/?edition=lite|Intel]]
+Download [[https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar|Quartus-lite-18.1.0.625-linux.tar]] from [[http://fpgasoftware.intel.com/?edition=lite|Intel]]. You can download with
+<code>
+cd
+cd cae
+wget --user=YOURUSERNAME --ask-password  https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar
+</code>
 ==== Install ====
-Make sure that you install the software at "/opt/altera/18.1". Create the altera directory and change the owner to your username. Replace "fritz:fritz" with your username and group.
+Check that you have
-<code>
+  * [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#missing_libpng12|Installed the missing libpng12]]
-sudo mkdir /opt/altera
-sudo chown fritz:fritz /opt/altera
-</code>
-When you run the installation, you can deselect all FPGA device families, except Cyclone V.
+Make sure that you install the software at "/opt/altera/18.1". When you run the installation, you can deselect all FPGA device families, except Cyclone V.
 <code>
-mkdir /tmp/qi
-cd /tmp/qi
-cp <TheQuartusTarFile> .
 tar -xvf Quartus-lite-18.1.0.625-linux.tar
 ./setup.sh
 </code>
-==== Setting PATH Variable ====
+Check that you have
+  * [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#fix_the_libfreetype_problem|Compiled the libfreetype library]]
-In order to be able to start the binaries from the commandline, the path for the binaries has to be in the PATH environment variable. For that you have to modify the .profile file in your home directory. Append the following snippet to the .profile file:
+and copy the library to the 18.1 directory
-.profile
-<code bash>
-# Include the ALTERA fpga software
-PATH="$PATH:/opt/altera/18.1/quartus/bin"
-# Include the ALTERA Modelsim VHDL simulator
-PATH="$PATH:/opt/altera/18.1/modelsim_ase/bin"
-</code>
-To see the changes in the PATH variable, you have to logout and login again. After that you can already start modelsim and quartus (see below). To check the setting of the PATH variable do:
-<code bash>
-fritz@vcae:~$ echo $PATH
-/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/altera/18.1/quartus/bin:/opt/altera/18.1/modelsim_ase/bin
-fritz@vcae:~$
-</code>
-You can see that the altera directories are now part of the PATH variable.
-==== Run Quartus and install remaining libraries ====
-=== Missing libpng12 ===
-<code>
-fritz@vcae:~$ quartus
-quartus: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
-fritz@vcae:~$
-</code>
-The following check shows that libpng16 is installed but quartus needs libpng12.
 <code>
-fritz@vcae:~$ dpkg -l | grep png
+mkdir /opt/altera/18.1/modelsim_ase/lib32
-ii  libpng16-16:amd64                     1.6.34-1ubuntu0.18.04.1             amd64        PNG library - runtime (version 1.6)
+cp ~/cae/freetype-2.8.1/objs/.libs/libfreetype.so* /opt/altera/18.1/modelsim_ase/lib32/
-fritz@vcae:~$
 </code>
-So download, compile and copy the libpng12 library to the quartus install directory
+Change /opt/altera/18.1/modelsim_ase/vco  file and find the location:
 <code>
-sudo apt install build-essential
+dir=`dirname "$arg0"`
-wget https://www.hs-augsburg.de/homes/beckmanf/public/libpng-1.2.59.tar.gz
-tar -xvzf libpng-1.2.59.tar.gz
-cd libpng-1.2.59
-./configure
-make
-cp .libs/libpng12.so* /opt/altera/18.1/quartus/linux64
 </code>
-=== Wrong libc ===
+After that line add
-When you try to run quartus and see this
 <code>
-fritz@vcae:/tmp$ quartus
+export LD_LIBRARY_PATH=/opt/altera/18.1/modelsim_ase/lib32
-/opt/altera/18.1/quartus/linux64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /usr/lib/x86_64-linux-gnu/libproxy.so.1)
-Failed to load module: /usr/lib/x86_64-linux-gnu/gio/modules/libgiolibproxy.so
-(quartus:47747): Gtk-WARNING **: 18:17:46.016: Error loading theme icon 'dialog-warning' for stock: Unable to load image-loading module: /usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /opt/altera/18.1/quartus/linux64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by /usr/lib/x86_64-linux-gnu/libicuuc.so.60)
 </code>
-then, you can do the following
+and [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#fix_linux_rh60_vco_script_problem|Fix linux rh60 problem]] in that file.
-<code>
+==== Create a version switcher for the PATH variable ====
-cd /opt/altera/18.1/quartus/linux64
-fritz@vcae:/opt/altera/18.1/quartus/linux64$ mv ./libstdc++.so.6 libstdc++.so.6.orig_dist
-fritz@vcae:/opt/altera/18.1/quartus/linux64$ ln -s /usr/lib/x86_64-linux-gnu/libstdc++.so.6 .
-</code>
+You can set the PATH variable as in the 13.0sp1 installation in .profile. If you install two versions, then you can append the following to .bashrc
-=== Run Quartus ===
-Run Quartus with
 <code>
-quartus
+alias v13="ln -rsvfT /opt/altera/13.0sp1 /opt/altera/version"
+alias v18="ln -rsvfT /opt/altera/18.1 /opt/altera/version"
 </code>
-and click the "Run the Quartus Prime software" button
+You need to open a new bash to make the changes active. Then you can switch between the versions by running v18 or v13.
-==== Run Modelsim ====
-=== Fix linux_rh60 vco script problem ===
-When you run modelsim and see:
-<code>
-fritz@vcae:/tmp$ vsim
-Error: cannot find "/opt/altera/18.1/modelsim_ase/bin/../linux_rh60/vsim"
-fritz@vcae:/tmp$
-</code>
-then, you have to fix the vco script. First change the permissions such that you can modify the script.
-<code>
-cd /opt/altera/18.1/modelsim_ase
-chmod u+w vco
-</code>
-Open the vco with
-<code>
-vi vco
-</code>
-and find the following section
-<code>
-      else
-        case $utype in
-.4.[7-9]*)       vco="linux" ;;
-.4.[1-9][0-9]*)  vco="linux" ;;
-.[5-9]*)         vco="linux" ;;
-.[1-9][0-9]*)    vco="linux" ;;
-.[0-9]*)             vco="linux" ;;
-          *)                vco="linux_rh60" ;;
-</code>
-And change the "linux_rh60" entry to "linux".
-=== Fix the ===
-<code>
-dir=`dirname "$arg0"`
-</code>